Home
日本語 (Coming Soon)
4K Vertex 2 18Gbps

Featuring auto-switching, video upscaling/downscaling, eARC audio extraction technology, and advanced EDID management.

UHD / HDR Scaler Matrix Splitter

Connection Guide

Front View - HDMI In x4

Rear View - HDMI Video Outputs x2 + HDMI Audio Outputs x1

Basic Settings
Accessing the Settings Page
  1. Connect the Ethernet cable to the VERTEX2 and plug in the power cord. Once the OLED screen lights up, locate the IP address in the top-right corner.
  1. Ensure your computer or smartphone is connected to the same network as the VERTEX2.
  1. Open a web browser and enter this IP address into the address bar to access the web settings page (Web GUI).
How to configure the projector to play Dolby Vision?
  1. Go to the EDID settings page > check CUSTOM > select 5 - Custom Default [SONY A1 LLDV DCI-P3] from the INPUT drop-down menu.
  1. Go to the HDR/AVI settings page > under HDR METADATA GENERATOR > check Use custom HDR for TX0 and TX1 when input is LLDV.
  1. Go to the DV settings page > check CAPTURED INPUT DOLBY VISION METADATA [from source]. If non-zero numbers are displayed inside the box, the configuration is successful, and Dolby Vision is currently playing.
Advanced Settings
How to Customize DV to HDR Parameter Settings
  1. Go to the EDID settings page > check AUTOMIX > under VIDEO FLAGS check TX0; under AUDIO FLAGS check AUDIO OUT; under HDR FLAGS check HDR/HDR10+ and HLG; under DV FLAGS check CUSTOM DV STRING.
  1. Go to the HDR/AVI settings page > under HDR METADATA GENERATOR > check Use custom HDR for TX0 and TX1 when input is LLDV.
  1. Go to the DV settings page > under CONSTRUCT CUSTOM DOLBY VISION DATA BLOCK, you can create a custom Dolby Vision data block here. All parameters can be adjusted according to your projector. Once finished, click Create to generate a set of DV data blocks, then click Send DV to apply.
  1. Copy and save this DV data block for your backup. If the VERTEX2 loses power, the parameter settings in this section will revert to factory defaults. In this case, simply paste your saved DV data block back in and click Send DV again—no need to reconfigure the parameters from scratch.
  1. Go to the DV settings page > check CAPTURED INPUT DOLBY VISION METADATA [from source]. If non-zero numbers are displayed inside the box, the configuration is successful, and Dolby Vision is currently playing.
Firmware Update
  1. Go to the CONFIG settings page > under VERTEX2 CONTROL > find FW UPDATE > click Choose File to upload the firmware file you wish to update.
  1. Click SEND to begin the update process.
  1. The update will take about 1 minute. Once completed, the VERTEX2 will automatically reboot.
Factory Reset
  1. Go to the CONFIG settings page > under VERTEX2 CONTROL > find RESET TO FACTORY DEFAULTS > check CLEAR ALL SETTINGS TO FACTORY DEFAULTS and check EDID FACTORY SETTINGS.
  1. Type uppercase "RESET" into the text box, then click RESET to execute.
Export Diagnostics
  1. Go to the CONFIG settings page > under VERTEX2 CONTROL: > find EXPORT CONFIG > click EXPORT. The diagnostic file will be exported to your computer or smartphone.
  1. If your VERTEX2 requires assistance, you can provide this diagnostic file to us so we can help resolve the issue.
Frequently Asked Questions
What is the maximum HDMI bandwidth and resolution supported by VERTEX2?

VERTEX2 utilizes the HDMI 2.0b specification, supporting a maximum bandwidth of 18Gbps and resolutions up to 4K@60Hz.

Can VERTEX2 be used with Sonos or Bose soundbars?

VERTEX2 cannot natively output eARC audio signals. To use it with an eARC soundbar, you will need to pair it with an Arcana for eARC output, or consider purchasing the VRROOM instead.

What is the difference between DIVA and Vertex2?

DIVA features two HDMI outputs: one dedicated to 4K and one to 2K (1080p), whereas Vertex2 can output 4K on both ports simultaneously. Additionally, DIVA supports HDR to SDR conversion (1080p) and ambient lighting features (Ambient), which are not available on Vertex2..

What is the difference between VRROOM, Vertex2, and DIVA?
  • eARC Support: VRROOM natively features a dedicated eARC output for soundbars, which Vertex2 and DIVA lack (requiring an additional Arcana).
  • Bandwidth & Resolution: VRROOM features two HDMI outputs supporting up to 4K120 (FRL5 / 40Gbps / 1200MHz), while Vertex2 and DIVA support up to 4K60 (18Gbps / 600MHz).
How do I troubleshoot intermittent power-cycling or random reboots during playback?

Please disable the IR feature on the VERTEX2.

Connect your device, open a web browser, and enter your VERTEX2's IP address to access the settings page.

Go to the CONFIG settings page > under VERTEX2 SETUP: > find IR: > select OFF.

My media player is an OPPO. Can I view Dolby Vision using the VERTEX2?

Yes! When using an OPPO player, you can force settings to upscale and output DV & LLDV on any display ranging from 2K SDR to 4K HDR.

Does VERTEX2 support eARC?

VERTEX2 does not support native eARC audio format output, meaning it cannot be connected directly to a soundbar or receiver that requires an incoming eARC signal.

However, VERTEX2 does support audio return from an eARC TV. Upon receiving the eARC audio signal, VERTEX2 will convert it into a standard audio format readable by legacy sound systems, and then output it to your audio equipment via the dedicated AUDIO OUT port..

What should I do if my projector or TV screen is flickering, glitching, or showing a black screen?

First, lower the resolution setting to 1080p or 720p for a retest. If the display functions normally (the screen stops flickering), the issue is likely caused by the HDMI cable. Please replace the HDMI cable and try again.

What should I do if the projector display has a reddish tint after connecting the VERTEX2?

You can try the following adjustments:

  1. Go to the EDID settings page > Check CUSTOM > Select 5 - Custom Default [SONY A1 LLDV DCI-P3] from the drop-down menu.
  1. If the colors still appear too red, select 10
Contact Us

IC BOSS.COM TECH INC.

4F, No. 170, Jiankang Rd., Zhonghe Dist., New Taipei City, Taiwan

+886-2-7731-2233

hdfury@affyy.com